top of page

Journal Papers
    
 1. A. C. Benim and W. Zinser,
    "Investigation into the Finite Element Analysis of Confined Turbulent Flows using a k-e Model of Turbulence",

     Computer Methods in Applied Mechanics and Engineering 51(1-3) (1985) 507-523.

2. A. C. Benim and W. Zinser,
    "A Segregated Formulation of Navier-Stokes Equations with Finite Elements",

     Computer Methods in Applied Mechanics and Engineering 57(2) (1986) 223-237.

3. A. C. Benim,
    "A Finite Element Solution of Radiative Heat Transfer in Participating Media utilizing the Moment Method",

     Computer Methods in Applied Mechanics and Engineering 67(1) (1988) 1-14.

4. A. C. Benim,
    "Finite Element Solution of an Enclosed Turbulent Diffusion Flame",
    International Journal for Numerical Methods in Fluids 9(3) (1989) 289-303.

5. A. C. Benim, W. Zinser and U. Schnell,
    "Investigation into the Finite Element Analysis of Enclosed Turbulent Diffusion Flames",
    Applied Mathematical Modelling 13(5) (1989) 258-267.

6. S. H. Suh and A. C. Benim,
    "The Primitive Variables Formulation of the Navier-Stokes Equations using the Finite Analytic Method",
    Applied Mathematical Modelling 13(9) (1989) 550-554.

7. A. C. Benim,
    "Finite Element Analysis of Confined Turbulent Swirling Flows",
    International Journal for Numerical Methods in Fluids 11(6) (1990) 697-717.

8. A. C. Benim and H. G. Neuhoff,
    "Analysis of Erosion Behaviour in a Turbocharger Radial Turbine",
    International Journal for Numerical Methods in Fluids 16(4) (1993) 259-285.

9. J. L. Xia, B. L. Smith, A. C. Benim, J. Schmidli and G. Yadigaroglu,
    "Effect of Inlet and Outlet Boundary Conditions on Swirling Flows" ,
    Computers & Fluids 26(8) (1997) 811-823.

10. A. C. Benim and K. J. Syed,
     "Laminar Flamelet Modelling of Turbulent Premixed Combustion",
    Applied Mathematical Modelling 22(1-2) (1998) 113-136.

11. A. C. Benim and E. Pasqualotto,
     "Investigation into the Modelling of Diesel Side Injection Systems"
     International Journal of Computer Applications in Technology 11(3-5) (1998) 211-218.

12. E. Pasqualotto, A. C. Benim and I. Birinci,
     "A New Phenomenological Approach for Diesel Engine Side Injection Systems and Comparison with Computational Fluid Dynamics",
     Progress in Computational Fluid Dynamics - An International Journal 1(1-3) (2001) 149-158.

13. B. Epple and A. C. Benim,    
     "A CRFD Study of Supercritical 2 x 900 MW Boilers for Shanghai / P. R. of China",

      Progess in Computational Fluid Dynamics - An International Journal 3(2-4) (2003) 140-144.

14. A. C. Benim, M. Cagan and D. Gunes,
     "Computational Analysis of Transient Heat Transfer in Turbulent Pipe Flow",
     International Journal of Thermal Sciences 43(8) (2004) 725-732.

15. A. C. Benim, D. Brillert and M. Cagan,
     "Computational Investigation of the Flow in Pre-Swirl Stator-Rotor Systems",

      International Journal of Computational Methods 1(2) (2004) 329-343.

16. A. C. Benim, B. Epple, B. Krohmer,
     "Modelling of Pulverized Coal Combustion by a Eulerian-Eulerian Two-Phase-Flow Formulation"
     Progress in Computational Fluid Dynamics - An International Journal 5(6) (2005) 345-361.

17. A. C. Benim, M. Cagan, B. Bonhoff and D. Brillert,
     "Computational Analysis of Flow in Gas Turbine Pre-Swirl Systems with Emphasis on Stator-Rotor Interface Formulation",
     IASME Transactions 2(6) (2005) 876-887.

18. A. C. Benim, A. Nahavandi and K. Syed,
     "URANS and LES Analysis of Turbulent Swirling Flows",
     Progress in Computational Fluid Dynamics - An International Journal 5(8) (2005) 444-454.

19. B. Epple, W. Fiveland, B.Krohmer, G. Richards and A. C. Benim,
     "Assessment of Two-Phase Flow Models for the Simulation of Pulverised Coal Combustion",
     Clean Air: International Journal on Energy for a Clean Environment 6(3) (2005) 267-287, doi:10.1615/InterJEnerCleanEnv.v6.i3.50
.

20. A. C. Benim, P. Stegelitz and B. Epple,
      “Simulation of the Two-Phase Flow in a Laboratory Coal Pulveriser”,
     Forschung im Ingenieurwesen-Engineering Research 69(4) (2005) 197-204.

21. A. C. Benim, A. Nahavandi, P. J. Stopford and K. J. Syed,
     “URANS, LES and DES Analysis of Turbulent Swirling Flows in Gas Turbine Combustors”,

      WSEAS Transactions on Fluid Mechanics 1(5) (2006) 465-472.

22. A. C. Benim, K. Ozkan, M. Cagan and D. Gunes,
     “Computational Investigation of Turbulent Jet Impinging onto Rotating Disk”,
     International Journal of Numerical
Methods for Heat and Fluid Flow 17(3) (2007) 284-301.

23. J. P. Kim, U. Schnell, G. Scheffknecht and A. C. Benim,
     “Numerical Modeling of Mild Combustion for Coal”,
    Progress in Computational Fluid Dynamics - An International Journal 7(6) (2007) 337-346.

24. A. C. Benim, F. Gul and E. Pasqualotto,
     “Loss Correlations for Developing Turbulent Pipe Flow”,
     International Review of Mechanical Engineering 1(1) (2007) 18-24.

25. A. C. Benim, F. Gul and E. Pasqualotto,
     "Influence of the Inlet Swirl Velocity Profile Shape on Swirl Decay in Laminar Pipe Flow",

      Progress in Computational Fluid Dynamics - An International Journal 7(6) (2007) 347-353.

26. A. C. Benim, P. J. Stopford, E. Buchanan and K. J. Syed,
     "Simulation of Turbulent Swirling Flows: Gas Turbine Combustor Application and Validation",
     NAFEMS International Journal of CFD Case Studies 7 (2008) 5-15.

27. A. C. Benim, E. Pasqualotto and S. H. Suh,
     “Modeling Turbulent Flow Past a Circular Cylinder by RANS,URANS, LES and DES”,

      Progress in Computational Fluid Dynamics - An International Journal 8(5) (2008) 299-307.

28. A. C. Benim, M. Escudier, P. J. Stopford, E. Buchanan and K. J. Syed,
     “Computational Investigation of Turbulent Swirling Flows in Gas Turbine Combustors”,

      International Journal of Fluid Machinery and Systems 1(1) (2008) 1-9.

29. M. Cagan, D. Gunes and A. C. Benim,
     “Zamana Bagli Boru Akisindaki Isi Gecisinin Sayisal Olarak Incelenmesi”,
     Itüdergisi/d Mühendislik, Istanbul Technical University 8 (2009) 105-116.


30. R. A. Damseh, M. S. Tahat and A. C. Benim,
      "Nonsimilar Solutions of Magnetohdrodynamic and Thermophoresis Particle Deposition on Mixed Convection Problem
     in Porous Media along a
Vertical Surface with Variable Wall Temperature",
     Progress in Computational Fluid Dynamics - An International Journal 9(1) (2009) 58-65.

31. M. Cagan, A. C. Benim and D. Gunes,
     "Computational Analysis of Gas Turbine Preswirl System Operation Characteristics",
     WSEAS Transactions on Fluid Mechanics 4(4) (2009) 117-126.
 
32. A. C. Benim, E. Aslan and I. Taymaz,
     "Investigation into LBM Analysis of Incompressible Laminar Flows at High Reynolds Numbers"

      WSEAS Transactions on Fluid Mechanics 4(4) (2009) 107-116.

33. A. C. Benim, M. P. Escudier, A. Nahavandi, A. K. Nickson, K. J. Syed and F. Joos,
     “Experimental and Numerical Investigation of Isothermal Flow in an Idealized Swirl Combustor”,

      International Journal of Numerical Methods for Heat and Fluid Flow 20(3) (2010) 348-370.

34. A. C. Benim, M. P. Escudier, A. Nahavandi, A. K. Nickson, K. J. Syed and F. Joos,
     “Computational Analysis of Incompressible Turbulent Flow in an Idealized Swirl Combustor”,

      Progress in Computational Fluid Dynamics - An International Journal 11(1) (2011) 42-53.

35. A. M. Maqableh, A. F. Khadrawi, M. A. A-Nimr, S. A. Ammourah and A. C. Benim,

      "Heat Transfer Characteristics of Parallel and Counter Flow Micro-Channel Heat Exchangers with Varying Wall Resistance",
     Progress in Computational Fluid Dynamics - An International Journal 11(5) (2011) 318-328.

36. A. C. Benim, A. Nahavandi, A. Assmann, D. Schubert, P. Feindt and S. H. Suh,

      "Simulation of Blood Flow in Human Aorta with Emphasis on Outlet Boundary Conditions",
     Applied Mathematical Modelling 35(7) (2011) 3175-3188.

37. A. C. Benim, E. Aslan and I.Taymaz,
     "Lattice Boltzmann Method for Laminar Forced Convection in a Channel with Triangular Prism",

      Heat Transfer Research 42(4) (2011) 359-377, doi:10.1615/HeatTransRes.2011002483.

38. A. C. Benim, H. Chattopadhyay and A. Nahavandi,
     "Computational Analysis of Turbulent Forced Convection in a Channel with a Triangular Prism",

      International Journal of Thermal Sciences 50(10) (2011) 1973-1983.

39. A. C. Benim, F. Gul, A. Nahavandi, A. Assmann, P. Feindt and F. Joos,
     "Computational Analysis of Blood Flow in Human Aorta",

      International Journal of Emerging Multidisciplinary Fluid Sciences 2(4) (2010) 233-242.

40. H. Chattopadhyay and A. C. Benim,
     "Turbulent Heat Transfer on a Moving Surface due to Impinging Slot Jets",
    ASME Journal of Heat Transfer, 133(10) (2011) Article Number: 104502-1, 5 pages, doi:10.1115/1.4004075.

41. A. M. Maqableh, S. A. Ammourah, A. F. Khadrawi, M. A. Al Nimr and A. C. Benim,

      "Hydrodynamics Behaviour of a Fluid Flow in Micro-Venturi",
     Canadian Journal of Physics 90(1)  (2012) 83-89.

42. A. Assmann, A. C. Benim, F. Gul. P. Lux, P. Akhyari, U. Boeken, F. Joos, P. Feindt and A. Lichtenberg,

      "Pulsatile Extracorporeal Circulation During On-Pump Cardiac Surgery Enhances Aortic Wall Shear Stress",
     Journal of Biomechanics 45(1) (2012) 156-163: doi:10.1016/jbiomech.2011.09.021.

43. E. Aslan, A. Nahavandi, I. Taymaz and A. C. Benim,
    "A Note on Modelling Non-Rectangular Boundaries by the Lattice Boltzmann Method",

      Progress in Computational Fluid Dynamics 12(6) (2012) 433-438.

44. I. Taymaz, E. Aslan and A. C. Benim,
    "Numerical Investigation of Incompressible Fluid Flow and Heat Transfer across a Bluff Body in a Channel Flow",

      Thermal Science 19(2) (2015) 537-547. doi:10.2298/TSCI120220145T.

45. S. A. Ammourah, A. C. Benim, A. M. Maqableh, A. F. Khadrawi and M. A. Al-Nimr,

      "Flow Characteristics of a Micro Orifice",
     JP Journal of Heat and Mass Transfer 7(1) (2013) 17-34.

46. A. Al-Halbouni, H. Rahms, B. Chalh-Andreas, A, Giese and A. C.Benim,
     "Entwicklung eines Kombibrenners für den Kohlevergasungsprozess",
      Gaswärme International 62(4) (2013) 67-72.

 

47. E. Aslan, I. Taymaz and A. C. Benim,

      "Investigation of the Lattice Boltzmann SRT and MRT Stability for Lid Driven Cavity Flow",
     International Journal of Materials, Mechanics and Manufacturing 2(4) (2014) 317-324,
doi:10.7763/IJMMM.2014.V2.149.

 

48. Р.Г. Ризванов, А.М. Файрушин , Али С. Беним, О.Ф. Хафизова , И.Р. Сагадиев,
      (R. G. Rizanov, A. M. Fairushin, Ali C. Benim, O. F. Khafizova, I. R. Sagadiev)
      "Повышение точности изготовления сварных конструкция применением вибрационной обработки в процессе сварки",

       (Accuracy increase in manufacturing of welded structures by vibration treatment during process of welding)
      Монтажные и специальные работы в строительстве, Москва (Assembling and Special Topics in Construction, Moscow)
      ISSN 0027-0040, 10 (2015) 12-15.

 

49. Ризванов Р.Г., Али C. Беним, Файрушин А.М., Каретников Д.В., Хафизова О.Ф.
      (R.G. Rizvanov, Ali Cemal Benim, A.M. Fairushin, D.V. Karetnikov, O.F. Khafizova)
      "Численное моделирование колебаний корпуса аппарата при его вибрационной обработке в процессе сварки",

       (Numerical simulation of vessel shell oscillations induced by the vibratory treatment during welding)
      Электронный научный журнал «Нефтегазовое дело» (Electronic Scientific Journal "Oil and Gas Business",

       ISSN 1813-503X) 6 (2015) 308-322.


50. E. Aslan, I. Taymaz and A. C. Benim,
     "Investigation of LBM Curved Boundary Treatments for Unsteady Flows",
     European Journal of Mechanics - B/Fluids 51 (2015) 68-74.

51. A. Assmann, F, Gül, A. C. Benim, F. Joos, P. Akhyari and A. Lichtenberg,
     "Dispersive Aorta Cannulas Reduce Aortic Wall Shear Stress Affecting Atherosclerotic Plaque Embolization",

      Artificial Organs 39(3) (2015) 203-211.

52. P. Oclon, S. Lopata, M. Nowak and A. C. Benim,

      "Numerical Study on the Effect of Inner Tube Fouling on the Thermal Performance of High-Temperature Fin-and-Tube Heat Exchanger",
      Progess in Computational Fluid Dynamics - An International Journal 15(5) (2015) 290-306.

 

53. A. C. Benim, F. Gül, A. Assmann, P. Akhyari, A. Lichtenberg and F. Joos,
     "Validation of Loss-Coefficient Based Outlet Boundary Conditions for Simulation Aortic Flow",

      Journal of Mechanics in Medicine and Biology 16(2) (2016) 1650011, 15 pages, doi:10.1142/S0219519416500111.


54. D.G.Ebling, A.Krumm, B.Pfeiffelmann, J.Gottschald, J.Bruchmann, A.C.Benim, M.Adam, R.Labs, R.R.Herbertz, A.Stunz,
     "Development of a System for Thermoelectric Heat Recovery from Stationary Industrial Processes",

      Journal of Electronic Materials 45(7) (2016) 3433-3439, doi:10.1007/s11664-016-4511-8.


55. A. C. Benim and K. Kuppa,

      "Modeling of Entrained-Flow Coal Gasification by an Equilibrium Eulerian-Eulerian Two-Phase Flow Formulation",
     Isi Bilimi ve Teknigi Dergisi - Journal of Thermal Science and Technology 36(2) (2016) 93-102.

 

56. S. Iqbal, A. C. Benim, S. Fischer, F. Joos, D. Kluß and A. Wiedermann,

      "Experimental and Numerical Analysis of Natural, Bio and Syngas Swirl Flames in a Model Gas Turbine Combustor",
     Journal of Thermal Science 25(5) (2016) 460-469.


57. S. Bhattacharyya, H. Chattopadhyay and A. C. Benim,

      "Simulation of Heat Transfer Enhancement in Tube Flow with Twisted Tape Insert",

      Progress in Computational Dynamics - An International Journal 17(3) (2017) 193-197.

 

58. A. C. Benim, S. Iqbal, F. Joos and A. Wiedermann,
     "Numerical Analysis of Turbulent Combustion in a Model Swirl Gas Turbine Combustor"

      Journal of Combustion 2016 Article ID: 2572035 (2016), 12 pages, doi:10.1155/2016/2572035.

59. M. S. Tahat and A. C. Benim,

      "Experimental Analysis on Theromphysical Properties of Al2O3/CuO Hybrid Nano Fluid with its Effects on Flat Plate Solar Collector"
     Defect and Diffusion Forum 374 (2017) 148-156.

 

60. A. C. Benim, S. Iqbal, W. Meier, F. Joos and A. Wiedermann,

      "Numerical Investigation of Turbulent Swirling Flames with Validation in a Gas Turbine Model Combusor"
      Applied Thermal Engineering 110(5) (2017) 202-212.

 

61. A. Majumder, B. Pfreiffelmann, F. Gül, M. Diederich, A. C. Benim,

      "A Numerical Investigation of Oscillating Flow in Pipes"

       International Journal on Numerical and Analytical Methods in Engineering 5(3) (2017) 65-69.

 

62. S. Bhattacharyya, H. Chattopadhyay and A. C. Benim,

      "Computational Investigation of Heat Transfer Enhancement by Alternating Inclined Ribs in Tubular Heat Exchanger"

       Progress in Computational Fluid Dynamics - An International Journal 17(6) (2017) 390-396.

63. A. Farooq, R. Ali and A. C. Benim,

      "Soret and Dufour Effects on Three Dimensional Oldroyd-B Fluid"

      Physics A: Statistical Mechanics and its Applications 503 (2018) 345-354.

64. S. Bhattacharyya, H. Chattopadhyay, A. Guin and A. C. Benim,

      "Investigation of Inclined Turbulators for Heat Transfer Enhancement in a Solar Air Heater"

       Heat Transfer Engineering 40 (17-18) (2019) 1451-1460. doi:10.1080/01457632.2018.1474593.

65. B. Pfeiffelmann, A. C. Benim and F. Joos,

      "A Finite Volume Analysis of Thermoelectric Generators"

       Heat Transfer Engineering 40 (17-18) (2019) 1442-1450. doi: 10.1080/01457632.2018.1474588.

66. A. C. Benim, M. Diederich and B. Pfeiffelmann,
     "Aerodynamic Optimization of Airfoil Profiles for Small Horizontal Axis Wind Turbines"

      Computation 6(2), 34 (2018) doi:10.3390/computation6020034.
 

67. S. Bhattacharyya, A. C. Benim, H. Chattopadhyay and A. Banerjee,
     "Experimental Investigation of Heat Transfer Performance of Corrugated Tube with Spring Tape Inserts"
     Experimental Heat Transfer 32(5) (2019) 411-425.

68. A. C. Benim, M. Diederich, F. Gül, P. Oclon and J. Taler,
     "Computational and Experimental Investigation of the Aerodynamics and Aeroacoustics of a Small Wind Turbine with Quasi-3D Optimization"
     Energy Conversion and Management 177 (2018) 143-149.

69. A. C. Benim, A. Cicek and A. M. Eker,

     "A Computational Investigation of the Thermohydraulics of an EGS Project"

     Journal of Thermal Science 27 (5) (2018) 405-412.

70. A. C. Benim, B. Pfeiffelmann, P. Oclon and J. Taler,

      "Computational Investigation of a Lifted Hydrogen Flame with LES and FGM"

      Energy 173 (2019) 1172-1181.

71. S. Bhattacharayya, A. C. Benim, H. Chattopadhyay and A. Banerjee,

      "Experimental and Numerical Analysis of Forced Convection in a Twisted Tube"

      Thermal Science 23 (4) (2019) 1043-1052,

72. B. Pfeiffelmann, A. C. Benim and F. Joos,

       "Computational Investigation of Impingement Cooling of Thermoelectric Generators"

       Heat Transfer Engineering (accepted). doi: 10.1080/01457632.2019.1699296.

73. A. C. Benim and B. Pfeiffelmann,

      "Computational Investigation of Laminar Premixed Hydrogen Flame Past a Quenching Mesh"

      International Journal of Numerical Methods for Heat and Fluid Flow 30 (4) (2019) 1923-1935.

74. A. Bit, A. Ablawi, H. Chattopadhyay, Q. A. Quais, A. C. Benim, M. Rahimi-Gorji and H. T. Do,

      "Three Dimensional Numerical Analysis Of Hemodynamic Of Stenosed Artery Considering Realistic Outlet Boundary Conditions"

      Computer Methods and Programs in Biomedicine 185 (2020) 105163, 10 pages.

75. A. Bit,  H. Chattopadhyay, Q. A. Quais and A. C. Benim,

      "Design and Development of Pulsatile Cardiovascular Flow Simulator and Comparative Assessment of Flow Through Stenosed Blood Vessel"

      Journal of Biomechanics (submitted).

76. R. Ali, A. Farooq, A. Shahzad, A. C. Benim, A. Iqbal, M. Razzaq,

      "Computational Approach on Three-Dimensional Flow of Couple Stress Fluid with Convective Boundary Conditions",

       Physics A: Statistical Mechanics and Its Applications 553 (2020) 124056.

77. S. Bhattacharyya, A. C. Benim, M. Pathak, S. Chamoli and A. Gupta,

      "Thermohydraulic Characteristics of Inline and Staggered Angular Cut Baffle Inserts in the Turbulent Flow Regime",

      Journal of Thermal Analysis and Calorimetry 140 (2020) 1519-1536.

78. A. C. Benim, T. Frank, A. Assmann, A. Lichtenberg and P. Akhyari,

       "Computational Investigation of Hemodynamics in Hardshell VenousReservoirs: A Comparative Study",

        Artificial Organs 44 (4) (2020) 411-418.

79. E. Abohamzeh, M. Jamil and A. C. Benim,

       "Prediction of Aeroacoustic Performance of Counter-Rotating Wind Turbine by Changing the Rotational Speed of Front Rotor",
      SN Applied Sciences 2, 86 (2020). doi: 10.1007/s42452-019-1864-7.

80. H. Nemati, M. M. Arkedani, A. C. Benim and J. Meyer,

       "Optimization of Horizontal Annular Finned Tube Under Natural Convection Heat Transfer",

       Heat Transfer Engineering (2021) DOI: 10.1080/01457632.2021.1975998.

81. N. Biswas, N. K. Manna, A. Datta, D. K. Mandal and A. C. Benim,

       "Role of Aspiration to Enhance MHD Convection in Protruded Heater Cavity",

        Progress in Computational Fluid Dynamics - An International Journal 20 (6) (2020) 363-378.

82. A. C. Benim and B. Pfeiffelmann,

      "Comparison of Combustion Models for Lifted Hydrogen Flames within RANS Framework",

      Energies 13, 152 (2020)  doi:10.3390/en13010152.

83. B. Pfeiffelmann, M. Diederich, F. Gül, A. C. Benim, M. Heese and A. Hamberger,
      "Computational and Experimental Investigation of an Industrial Biomass Furnace",

       Chemical Engineering & Technology 43 (8) (2020) 1538-1546.

84. A. Shahzad, U. Gulistan, R. Ali, A. Iqbal, A. C. Benim, M. Kamran, Salah U. Khan, Shahab U. Khan, A. Farooq,

       "Numerical Study of Axisymmetric Flow and Heat Transfer in a Liquid Film over an Unsteady Radially Stretching Surface",

        Mathematical Problems in Engineering (2020) 6737243.

85. N. Biswas, N. K. Manna, A. Datta, D. K. Mandal, A. C. Benim,

      "Role of Aspiration to Enhance MHD Convection in Protruded Heater Cavity",
      Progress in Computational Fluid Dynamics - An International Journal 20 (6) (2020) 363-378.

86. C. Deniz Canal, Y. E. Boke, O. Aydin and A. C. Benim,

       "Computational Analysis of Pulverized Coal Co-Firing with Biomass in 150 WMe Unit of Tuncbilek Thermal Power Plant"

       Isi Bilimi ve Teknigi Dergisi - Journal of Thermal Science and Technology 41 (1) (2021)) 37-50.

87. A. C. Benim and M. S. Bhagavan,

      "Numerical Investigation of Friction Laws for Undulated Channel"
      International Journal of Numerical Methods in Heat and Fluid Flow 31 (6) (2021) 1837-1856, doi: 10.1108/HFF-06-2020-0383.

88. A. C. Benim,

      "Numerical Calculation of Sink Velocities for Helminth Eggs in Water",

      Computation (2021) 9(12), 136.

89. A. C. Benim, C. Deniz Canal and Y. E. Boke,
    "A Validation Study for RANS Based Modelling of Swirling Pulverized Fuel Flames",

      Energies 14, 7323 (2021).

90. B. Pfeiffelmann, A. C. Benim and F. Joos,

      "Water-Cooled Thermoelectric Generators for Improved Net Output Power: A Review",

      Energies (2021) 14(35), 8329.

91. A. Basaran, A. C. Benim and A. Yurddas,

     "Numerical Simulation of the Condensation Flow of the Isobutane (R600a) Inside Microchannel",

     Heat Transfer Engineering 43(3-5) (2022) 337-361.
 

92. S. Bhattacharyya, A. C. Benim, R. Bennacer and K. Dey,

      "Influence of Broken Twisted Tape on Heat Transfer Performance in Novel Axial Corrugated Tubes: Experimental and Numerical Study"

      Heat Transfer Engineering 43(3-5) (2022) 437-362.

93. S. G. Das, S. Bhattacharyya, H. Chattopadhyay and A. C. Benim,

       "Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Micro-channels
      under Pulsating Inlet Flow Condition",

       Heat Transfer Engineering 43(3-5) (2022) 410-422.

94. A. C. Benim, C. Deniz Canal and Y. E. Boke,

      "Computational Investigation of Oxy-Combustion of Pulverized Coal and Biomass in a Swirl Burner",

      Energy 238, Part C, (2022) 121852.

95. N. S. Senthur, C. Anand, M. R. Kumar, P. V. Elumalai, M. I. Sahjahan, A. C Benim, E. A. Nasr, H. M. AQ. Hussain, M. Parthasrathy,

      "Influence of cobalt chromium nanoparticles in homogeneous charge compression ignition engine operated with citronella oil",

      Energy Science & Engineering 10 (2022) 1251-1263.

96. R. Mabrouk, A. C. Benim, H. Naji and H. Dhahri,

      "Investigation of Pulsed Flow Effects on the Phase Change within an Open-Cell Metal Foam using Thermal Lattice Boltzmann Method",

      Transport in Porous Media 147 (2023) 225-257.

97. B. Pfeiffelmann, C. Özman, A. C. Benim. F. Joos,

      "Analysis of the Effect of Nonuniform Surface Temperature Distribution on the Performance of a Thermoelectric Generator",

      Sustainable Energy Technologies and Assessments 53 A (2022) 102375

98. K. Pillai Sidharth, Mattacaud R. Rajkumar, V. K. Chithrakumar, Gordon L. Asirvatham, Ali Cemal Benim, Somchai Wogwises,

      "Impact of increased outer wall rotation on convection in a vertical annulus with a stationary heated inner cylinder"

      Heat Transfer (2022) DOI: 10.1002/htj.22617.
 

99. R. Mabrouk, H. Naji, A. C. Benim and H. Dhahri,

      "A State of the Art Review on Sensible and Latent Heat Thermal Energy Storage Processes in Porous Media: Mesoscopic Simulation"

      Applied Sciences (2022) 12(14) 6995.

100. N. Biswas, D. K. Mandal, N. K. Manna and A. C. Benim,

       "Magneto-Hydrothermal Triple-Convection in a W-shaped Porous Cavity Containing Oxytactic Bacteria".

        Scientific Reports 12 (2022) Article number: 18053. https://doi.org/10.1016/j.applthermaleng.2023.120466.

101. N. Biswas, D. K. Mandal, N. K. Manna and A. C. Benim.

        "Novel Stair-Shaped Ground Absorber for Performance Enhancement of Solar Chimney Power Plant",

        Applied Thermal Engineering 227 (2023) Article number: 120466. https://doi.org/10.1016/j.applthermaleng.2023.120466

102. D. K. Manna, N. Biswas, N. K. Manna and A. C. Benim.

        "Impact of Chimney Divergence and Sloped Absorber on Energy Efficacy of a Solar Chimney Power Plant (SCCP)"

         Ain Shams Engineering Journal 15 (2) (2024) 102390. DOI:10.1016/j.asej.2023.102390.

103. N. Biswas, D. K. Mandal, N. K. Manna and A. C. Benim.

        "Enhanced Energy and Mass Transport Dynamics in a Thermo-Magneto-Bioconvective Porous System Containing Oxytactic Bacteria and  
       Nanoparticles: Cleaner Energy Application"
,

        Energy (2023) 263 Part B, Article number: 125775. https://doi.org/10.1016/j.energy.2022.125775.

104. A. C. Benim and A. Cicek,

        "Comparative Analysis of Water and Carbon Dioxide Injection for the Thermohydraulics of an EGS Project in Dikili Geothermal Field, Türkiye",

         Bulletin of the Mineral Research and Exploration 171 (2023) 91-105.


105. A. C. Benim and A. Korucu,

        "Computational Investigation of Non-Premixed Hydrogan-Air Laminar Flames",

        International Journal of Hydrogen Energy 48 (2023) 14492-14510. https://doi.org/10.1016/j.ijhydene.2022.12.248.

 

106. N. Biswas, D. K. Mandal, S. Bose, N. K. Manna and A. C. Benim,

        "Experimental Treatment of Solar Chimney Power Plant - A Comprehensive Review"

        Energies 16 (2023) 6134, https://doi.org/10.3390/en16176134.

107. D. K. Mandal, N. Biswas, N. K. Manna, D. K. Gayen and A. C. Benim,

        "An Application of Artificial Neural Network (ANN) for Comparative Performance Assessment of Solar Chimney (SC) Plant
        for Green Energy Production",

        Scientific Reports 14 (2024) Article Number 979

108. S. Bhattacharyya, T. Bhatt, D. K. Vishwakarma, A. C. Benim, J. Abraham,

        "Effect of Mechanical Vibration and its Influence on Nanofluid Thermal Performance in a Heat Exchanger",

         Numerical Heat Transfer - Part A (accepted) DOI: 10.1080/10407782.2024.2331589
 

109. O. Yalcinkaya, U. Durmaz, A. Ü. Tepe, A. C. Benim, Ü. Uysal,

         "Heat and Flow Characteristics of Airfoil-Shaped Fins on a Curved Target Surface in a Confined Channel for Impinging Jet Array",

          Energies 17(5) (2024) 1238.

110. M. A. Sulaiman, A. M. Adham, H. F. Hasan, A. C. Benim, H. A. Anjal, 
        "Performance Analysis of Nowel Dew Point Evaporative Cooler with Shell and Tube Design Through Different Air Water Flow Configurations"

         Energy 289 (2024) 129922.

111. I. Zengin, B. Erdogan and A. C. Benim,

        "CFD and Taguchi Based Optimization of Air Driven Single Stage Axial Turbine Blade Profiles"

         Energy 290 (2024) 130333..

112. J. Albers, U. Hillemann, A. Retzlaff, Z. Mohammad, A. C. Benim, K. Dröder, A. Hürkamp,

         "Introduction and Experimental Validation of a Two-step Numerical Approach to Predict Bead Shaping and Shrinkage in Material Extrusion",

          Additive Manufacturing (submitted).

113. D. K. Mandal, S. Bose, N. Biswas, N. K. Manna, E. Cüce, A. C. Benim,

         "Solar Chimney Power Plant for Sustainable Air Quality Management Integrating Photocatalysis and Particulate Filtration: 

          A Comprehensive Review",

          Sustainability 16 (2024) 2334.

114. A. Basaran, A. C. Benim,

        "Development of Correlations Based on CFD Study for Microchannel Condensation Flow of Environmentally Friendly Hydrocarbon Refrigerants",

         Energies 17 (2024) 1531.

115. B. Allweyer, A. Ahmed, F. U. Rückert, D. Hübner, H. Knaus.,F. Klinger,

        "Flow and Heat Transfer Optimization of Gearless Wind Turbines in the Range of 3 to 12 MW"

         Energy (submitted)

116. M. B. Özel, U. Durmaz, M. A. N. Öz, A. Ü. Tepe, C. Öz, Ü. Uysal, O. Yalcinkaya, A. C. Benim.

        "Utilization of a Deep Learning Artifical Intelligence Model for Extended Jet Impingement Cooling in Channel Flow",

         Journal of Thermal Analysis and Calorimetry (submitted).

117. A. Basaran, A. C. Benim,

        "Condensation Flow of Refrigrants inside Mini and Macrohannels: A Review"

         Applied Sciences 14(7) (2024), 2988; https://doi.org/10.3390/app14072988

118. D. K. Mandal, N. K. Manna, N. Biswas, T. Rudra, A. C. Benim,

        "Adiabatic Block Enhanced Heat Transport in Bottom-Heated Grooved Channel Undergoing Magneto-Nanofluidic Convection"

         Case Studies in Thermal Engineering (accepted), 2024.

119. R. Aich, D. Bhargavi, A. C. Benim,

        "Effect of Hydrodynamic and Thermal Anisotropy on Convective Heat Transfer in a Fluid Saturated Porous Duct: A Finite Volume Approach"

          Numerical Heat Transfer - Part A (submited), 2024.

120. M. I. Shajahan, A. C.. Benim,

        "Experimental Evaluation of Heat Sinks with granulated Phase Change Material in a Simulated Electronic Cooling System",

         Electrochimica Acta (submitted), 2024

121. A. C. Benim,

        "Investigation into the Computational Analysis of Microjet Hydrogen-Air Diffuison Flames"

        Fire (accepted), 2024

122. Mohammed A. Sulaiman, Hindren Ali Saber, Hasan F. Hasan  Ali C. Benim,

       "Experimental and Numerical Investigation of Novel Tubular Dew-point Evaporative Cooler",

        Energy Conversion and Management (submitted), 2024

 

123. F. U. Rückert, A. Ahme, B. Allweyer, D. Hübner, B. Ibrar, F. Klinger, H. Knaus, A. C. Benim,

        "Fluid Flow and Heat Transfer of a Novel Passive Cooling System for Gearless Wind Turbines with a Power Range of 3 to 12 MW",

        Energy (submitted) 2024.

Publications

 

 


 


 


 

bottom of page